XBEE PRO 63MW WIRE ANTENNA - SERIES 2B (ZIGBEE MESH)
Describtion : The XBee Pro 63mW Wire Antenna - Series 2B (ZigBee Mesh) is a radio frequency (RF) communication module that operates on the ZigBee protocol. It is part of the XBee family of RF modules produced by Digi International. The XBee Pro 63mW is designed for use in wireless mesh networks, and it is particularly useful for applications that require reliable and robust wireless communication over long distances. Here are some of the key features and specifications of the XBee Pro 63mW Wire Antenna Series 2B: - RF Frequency: 2.4 GHz - Operating Range: Up to 1 mile (1.6 km) in line-of-sight conditions - Data Rate: Up to 250 Kbps - Modulation: DSSS (Direct-Sequence Spread Spectrum) - Network Topology: Mesh, Point-to-Point, and Peer-to-Peer - Antenna Type: Wire antenna, with an SMA connector for an external antenna - Power Output: Up to 63 mW (18 dBm) - Input Voltage: 2.7 V to 3.6 V DC - Current Consumption: 40 mA (transmit mode), 50 mA (receive mode), and 2 μA (sleep mode) - Interface: UART (Universal Asynchronous Receiver-Transmitter) - Encryption: AES 128-bit encryption for secure communication - Dimensions: 24.4 mm x 32.9 mm x 9.1 mm - Operating Temperature: -40°C to +85°C The XBee Pro 63mW Wire Antenna - Series 2B is suitable for a wide range of applications, including remote monitoring and control, wireless sensor networks, and industrial automation. It can be used in point-to-point, point-to-multipoint, and mesh network topologies. The module is easy to integrate into existing systems, and it is supported by a range of software tools and development kits. The XBee Pro 63mW is a reliable and robust wireless communication module that provides a high level of performance and security for wireless applications. Specification : - RF Frequency: 2.4 GHz - Operating Range: Up to 1 mile (1.6 km) in line-of-sight conditions - Data Rate: Up to 250 Kbps - Modulation: DSSS (Direct-Sequence Spread Spectrum) - Network Topology: Mesh, Point-to-Point, and Peer-to-Peer - Antenna Type: Wire antenna with an SMA connector for an external antenna - Power Output: Up to 63 mW (18 dBm) - Receiver Sensitivity: -102 dBm at 250 Kbps - Input Voltage: 2.7 V to 3.6 V DC - Current Consumption: 40 mA (transmit mode), 50 mA (receive mode), and 2 μA (sleep mode) - Interface: UART (Universal Asynchronous Receiver-Transmitter) - Encryption: AES 128-bit encryption for secure communication - Dimensions: 24.4 mm x 32.9 mm x 9.1 mm - Weight: 4.2 g - Operating Temperature: -40°C to +85°C - Humidity: Up to 95% non-condensing - Compliance: FCC, CE, and RCM certified The XBee Pro 63mW Wire Antenna - Series 2B is a ZigBee mesh networking module that is designed for long-range communication with low power consumption. It can operate in a variety of network topologies, including point-to-point, point-to-multipoint, and mesh networks. The module has a wire antenna and an SMA connector for an external antenna, which makes it suitable for applications with specific antenna requirements. It supports a data rate of up to 250 Kbps and has a maximum output power of 63 mW, which makes it suitable for applications that require reliable and high-speed data transmission over long distances. The module is easy to integrate into existing systems and provides secure communication with AES 128-bit encryption.