TCA9548A 12C IIC Multiplexer Extension Board
he TCA9548A Expansion Board 8 Channel I2C IIC Expansion Module (CJMCU-9548) is designed to solve one of the most common limitations of the I2C communication protocol: multiple devices sharing the same fixed I2C address. Using the TCA9548A I2C multiplexer, the module creates eight independent I2C channels, allowing each identical I2C device to communicate separately without address conflicts. The desired channel is selected by sending a command to the multiplexer at its configurable I2C address, which is 0x70 by default. The module is compatible with both 3.3V and 5V systems, making it suitable for popular development platforms including Arduino, ESP32, ESP8266, Raspberry Pi, STM32, PIC, AVR, and other microcontrollers. Each output channel provides dedicated SDA and SCL lines, enabling connection of multiple identical sensors, displays, EEPROMs, ADCs, DACs, or other I2C peripherals. The board supports hot insertion, low standby current, active-low reset, and SMBus compatibility for reliable and flexible system integration. Its configurable address pins (A0, A1, A2) allow up to eight multiplexers to operate on the same I2C bus, enabling expansion to as many as 64 separate I2C channels. Allows connection of up to eight identical I2C devices. Eliminates I2C address conflicts. Eight completely independent I2C buses. Based on the reliable TCA9548A multiplexer IC. Default I2C address of 0x70 with configurable addresses up to 0x77. Supports cascading multiple multiplexers for larger systems. Compatible with both 3.3V and 5V logic levels. Supports hot insertion without system shutdown. Low standby current for power-efficient operation. Active-low hardware reset input. I2C and SMBus compatible. 5V tolerant inputs for enhanced compatibility. Simple software-controlled channel selection. Ideal for Arduino, ESP32, Raspberry Pi, STM32, PIC, AVR, and similar development boards. Compact design suitable for embedded and portable applications.