RP2040-Zero RP2040 USB-C Connector Microcontroller
The board is equipped with the RP2040 microcontroller designed by the Raspberry Pi foundation. The system has two ARM Cortex M0+ cores operating at a frequency of 133 MHz and 264 KB of RAM. The microcontroller is not equipped with flash memory, but on the board there is an external memory with a capacity of 2 MB connected via the QSPI interface. 1. USB type C 5. WS2812 2. NOR-Flash 2 MB W25Q16JVUXIQ 6. ME6217C33M5G 3. BOOT 7. RP2040 4. RESET 8. GPIO In addition to the RP2040 system and Flash memory, the user has a 3.3 V voltage regulator, Boot and Power buttons, an RGB diode, a USB type C connector for powering and programming the module and GPIO outputs, on which such peripherals as 12-bit were led out ADC, PWM inputs, I2C, SPI and UART interface. Features RP2040 microcontroller designed by Raspberry Pi Two ARM Cortex-M0 + cores clocked up to 133 MHz 264 kB of onboard SRAM LDO stabilizer 3.3 V 800 mA Built-in USB-C connector for programming and power 29 x multi-functional GPIO pins 4 x 12-bit ADC inputs with temperature sensor 16 x PWM 2 x UART 2 x I2C 2 x SPI Power and Boot buttons RGB LED WS2812 2 MB of external flash memory Supported programming languages: MicroPython and C/C++ Dimensions: 23.5 x 18 mm
