18650 LITHIUM BATTERY CHARGER AND PROTECTION MODULE 1A USB-C - TP4056

Description: This module is made for charging rechargeable lithium batteries using the constant-current/constant-voltage (CC/CV) charging method. In addition to safely charging a lithium battery the module also provides necessary protection required by lithium batteries. See below concerning the protection features this module provides. Features: SPECIFICATIONS - Chemistry: Lithium-Ion (Li-Ion)/ Lithium-Ion Polymer (Li-Po) - Charge Controller: TP4056 - Protection IC: DW01A - Charge/Discharge Control MOSFET: FS8205A - Charge Method: Constant-Current/Constant-Voltage (CC/CV) - Input Supply Voltage: 4.5~6.0 V - Constant Charge Current: 1 A - Configurable with Rprog resistor (R3, see diagrams and TP4056 datasheet) - Charge Complete (Float) Voltage: 4.2 V ±1.5% - Overcharge Protection - Overcharge Detection Voltage: 4.3 V ±50 mV - Overcharge Release Voltage: 4.1 V ±50 mV - Over-Discharge Protection - Over-Discharge Detection Voltage: 2.4 V ±100 mV - Over-Discharge Release Voltage: 3.0 V ±100 mV - Overcurrent Protection - Overcurrent Protection Threshold: 3 A - Overcurrent Cutout Delay: 10~20 ms - Short-Circuit Cutout Delay: 5~50 µs - Trickle Charge (Battery Reconditioning) - Trickle Charge Threshold Voltage: 2.9 V ±0.1 V - Trickle Charge Current: 130 mA ±10 mA - Dimensions: 29x17.3x4.3mm - Weight: 1.6g Kit include: 1 x Lithium Battery Charger and Protection Module 1A USB-C - TP4056