FILAMELINE TPU Flex Shore A98 Filament
FILAMELINE TPU Flex (Shore A98) Flexible Filament is an engineering material specially designed for applications where easy printing, high chemical resistance, high flexibility and toughness and impact resistance are required. Its flexibility can be adjusted according to the occupancy rate. It can be used in indirect (Bowden) and direct (Direct Drive) extruders.
Physical and Chemical Properties
Shore A98 flexibility
High elongation over 500%
Ease of printing compared to similar flexible materials
High chemical resistance
Excellent layer adhesion
Exceptional fatigue resistance
Very low odor emitted during printing
Low moisture absorption
Maintaining flexibility at low temperatures
Styrene and BPA free
NOTE:
It may be necessary to loosen the extruder thrust gears as much as possible before printing. It will be enough for the gears to be tightened to a level that can pull the TPU Flexible filament and make contact. In the slicing settings, the retraction value should be at the minimum level or off. Drying the exposed filament can improve print quality. (Drying: 65°C for 4 hours) Print speed is recommended in the range of 20-40 mm/s.