18650 LITHIUM BATTERY CHARGER AND PROTECTION MODULE 1A USB-C - TP4056

Description:

This module is made for charging rechargeable lithium batteries using the constant-current/constant-voltage (CC/CV) charging method. In addition to safely charging a lithium battery the module also provides necessary protection required by lithium batteries. See below concerning the protection features this module provides.

Features:

SPECIFICATIONS

• Chemistry:  Lithium-Ion (Li-Ion)/ Lithium-Ion Polymer (Li-Po)
• Charge Controller: TP4056
• Protection IC: DW01A
• Charge/Discharge Control MOSFET: FS8205A
• Charge Method: Constant-Current/Constant-Voltage (CC/CV)
• Input Supply Voltage: 4.5~6.0 V
• Constant Charge Current: 1 A
• Configurable with Rprog resistor (R3, see diagrams and TP4056 datasheet)
• Charge Complete (Float) Voltage: 4.2 V ±1.5%
• Overcharge Protection
• Overcharge Detection Voltage: 4.3 V ±50 mV
• Overcharge Release Voltage: 4.1 V ±50 mV
• Over-Discharge Protection
• Over-Discharge Detection Voltage: 2.4 V ±100 mV
• Over-Discharge Release Voltage: 3.0 V ±100 mV
• Overcurrent Protection
• Overcurrent Protection Threshold: 3 A
• Overcurrent Cutout Delay: 10~20 ms
• Short-Circuit Cutout Delay: 5~50 µs
• Trickle Charge (Battery Reconditioning)
• Trickle Charge Threshold Voltage: 2.9 V ±0.1 V
• Trickle Charge Current: 130 mA ±10 mA
• Dimensions: 29x17.3x4.3mm
• Weight: 1.6g

Kit include:

1 x Lithium Battery Charger and Protection Module 1A USB-C - TP4056